250-500cc 2010 WR300 Lowering Options

I'm 6 feet tall but am the stumpy legs and long torso version. Would love to lower the rear of my bike 2" if I could. Have looked at lowering the seat as well but these Husky's tend to be taller than most. Is there anything out there to buy or a design for a longer lowering link? All your help would be appreciated, thx

i made a lowering link based on the kouba version threads here, im just the short version i used a flap wheel on my grinder to shape the seat too

I'm 5,8" and i also cut my seat. I made sort of a step seat and took off about 1" in the middle section.

Ohlins spacers in the rear shock. You can get about an inch lower on seat height without losing too much travel. I had that done on mine at Solid Performance. Also slid the front forks up thru the clamps to lower the front.