1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 2010 WR300 Wheels?

Discussion in '2 Stroke' started by giantjoe, May 17, 2016.

  1. giantjoe Husqvarna
    AA Class

    Location:
    Canadia
    Husqvarna Motorcycle:
    2010 WR300
    On my last ride my front wheel bearing packed it in. I tried removing the bearings and can't get the c-clip to even move not to mention pulling it out. Must have been hot in there...:eek: Anyways, I'm currently in the process of heating/cooling PB blasting and if I can't get it out, I'll probably need a new hub. So what crossovers do I have? The 4 strokes from the same years? I hope I can find something used so I don't have to relace a tire...
    giantjoe, May 17, 2016
    #1

  2. fredd Husqvarna
    AA Class

    Location:
    PUERTO RICO
    Husqvarna Motorcycle:
    2016 kx 450f
    Other Motorcycles:
    1995 chopper
    try RADmfg.com
    fredd, May 17, 2016
    #2

  3. offroadeast Husqvarna
    AA Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    WR125; CR144
    Other Motorcycles:
    YZ250
    I'm not sure if it will work but I have a front and rear wheel off of a CR125 that I'm parting out.
    offroadeast, May 17, 2016
    #3

  4. giantjoe Husqvarna
    AA Class

    Location:
    Canadia
    Husqvarna Motorcycle:
    2010 WR300
    What year of CR? I'll have to look it up.
    giantjoe, May 17, 2016
    #4

  5. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    as I recall most all front wheels save the super-moot are the same 2000 or so on
    4 bolt rotor was universal and seems to be a common wheel
    the rear is another story wrong side for the sprocket for the 4 stroke and 125
    2premo, May 17, 2016
    #5