125-200cc 2011 Husqvarna WR 150 Skid Plate

Does anyone know of a company or individual that makes a skid plate for the 2011 Husky WR 150?

http://www.shop.pirieperfprod.com/HUSQVARNA-SKID-PLATES_c30.htm

Thanks for the info. After 8 months, I have not received the skid plate from P3. Has anyone built one for the new CR 125/140? I am still using the stock skid plate but the PA rocks need something more substantial .

I got one of thse ebay specials for my '09

http://www.ebay.com/itm/Husqvarna-W...Parts_Accessories&hash=item3a76e40eea&vxp=mtr

I had to do a little trimming to get it to fit just right but otherwise have been very happy with it.

+1

Definately high quality item. I've had it on my wr144 for a few months and have bashed the crap out of it, and it has so far held up very well.

ive

got one of these on my 08 and it works fine - looks cool too

Doesn't Kelly make one now?

Wow, I just wrote Kelly from Motosportz about this exact issue yesterday. I had/have a P3 guard, which I managed to knock off in a race. I picked up the plate itself, but the mounting hardware is gone. Wrote to P3, never heard anything. Does anyone know if they really exist anymore? Seems like the worst communication from any company that I've ever heard of.

Anyway, Kelly doesn't have any for the 2011's since the frame has changed from 09. (I think it changed in '10, but not sure.)

Here's one I found for you on Ebay that looks like it should work:

http://www.ebay.com/itm/Husqvarna-W...ies&vxp=mtr&hash=item3a76e40eea#ht_1265wt_908

If you're slightly handy....I made mine out of a $5 piece of aluminum plate. Just need a hammer, a vise, a drill and taps if you want to get fancy.

Hi Guys,
For a 2010 WR 150 or XC here in Australia.
I had a piece of aluminium plate bent up thru simple platerollers and then cut and filed smooth and it runs up in front of radiator hoses and has a hole for exhaust to poke out. Keeps bike extreemly clean in mud events. Extends to cover water pump housing. Simple electrical conduit clamps to hold in place with factory fittings. A bit finicky to fit but a treat when fitted up.

Mark - will do the pic and identification soon