1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

2011 TE310 Workshop Manual

Discussion in '4 Stroke' started by yorkie, Jun 18, 2011.

  1. yorkie Husqvarna
    C Class

    Location:
    Northern England
    Hi folks,
    Here you go, recently picked up my 310 and had the same issues regarding a workshop manual.
    Went back to my very efficient local dealer and they came up with this.
    <see next post below for correct link>
    Hope it helps.
    Perhaps it should be a sticky??
  2. yorkie Husqvarna
    C Class

    Location:
    Northern England
    Tessier and robertk61 like this.
  3. Mikenc Husqvarna
    A Class

    Location:
    Denver, nc
    Link is working fine. Thanks for posting the workshop manual.
  4. robertk61 Husqvarna
    A Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    09 WR250
  5. robertk61 Husqvarna
    A Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    09 WR250
    Tried to download, gets to about 10mb then says "file interrupted" ?? Is the file corrupt?? can you re-post it plleeeezzzeeeee??????
  6. dalecarlsbad1 Husqvarna
    C Class

    Location:
    SoCal
    [IMG]Down loaded the file today June 19th 2011 .....no problems.

    Thanks for the link
  7. yorkie Husqvarna
    C Class

    Location:
    Northern England
    OK, sorry for any problems.
    I have not used file hosting before so it could well be my fault.
    I have downloaded it to another hosting site but that will only allow me to send it as an email, I can do that without a hosting site though.
    Being a new member I'm not sure but can we PM other members?? If so I will gladly send it to anyone as a PDF file, just tell me how to PM.
    Otherwise if you wish to post an email address, probably not your main one, I will send it as an attachment.
    Hope this is all OK with the mods??
  8. robertk61 Husqvarna
    A Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    09 WR250
    Tried to download again today and it worked, thanks again.
  9. RailwayRog Husqvarna
    A Class

    Husqvarna Motorcycle:
    none
    Just bought a used 2011 te310 and I'm new to this forum.
    I tried using the above link and could not get it to work.
    Can anyone direct me to a link for a shop manual?
    Thanx,
    Roger
  10. mnb Husqvarna
    Pro Class

    Location:
    San Jose, California
    Husqvarna Motorcycle:
    2011 TE310 . . . . 2003 TE610e
    yeah, link downloads a zero length file.... :( Can someone repost somewhere? Thx!
  11. slyfox Husqvarna
    AA Class

    Location:
    USA
  12. mnb Husqvarna
    Pro Class

    Location:
    San Jose, California
    Husqvarna Motorcycle:
    2011 TE310 . . . . 2003 TE610e
  13. ZoomSplat Husqvarna

    Wonderful! I just picked up my 2011 TE310 today. I asked the dealer for the workshop manual and they looked all confused like "Why would you ever want that?" and said they would have to look into getting me one.
  14. PSUcanary Husqvarna
    C Class

  15. Catang5oh Husqvarna
    A Class

    Location:
    Alafreakinbama
    Thanks so much for the link.
  16. RailwayRog Husqvarna
    A Class

    Husqvarna Motorcycle:
    none
    Got it, thanx.
    Roger
  17. Pedec Husqvarna
    Pro Class

    Location:
    Sask.Canada
    I can get owner manual but can not get shop manual which I need. Do I need to enter http address when I hit link it takes me to goggle document but is empty. Thanks for any help.
  18. Catang5oh Husqvarna
    A Class

    Location:
    Alafreakinbama
    I had the same trouble also Pedec, just give it some time. I checked back later and it showed up. I think it's just slow downloading such a large file.
  19. Pedec Husqvarna
    Pro Class

    Location:
    Sask.Canada
    Just tried again and worked but it was owners manual not shop manual. Can you post shop manual also if you got it thanks
  20. mnb Husqvarna
    Pro Class

    Location:
    San Jose, California
    Husqvarna Motorcycle:
    2011 TE310 . . . . 2003 TE610e
    I downloaded the workshop manual from the link just above last night and it worked fine. /shrug