1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2012 wr125 DUCATI ignition

Discussion in '2 Stroke' started by BILLF, Sep 23, 2011.

  1. BILLF CH Sponsor

    Location:
    BMP Husqvarna, Salem, OR USA
    Husqvarna Motorcycle:
    92WXC350 /Lamson CR250/701 Vitpilen/
    Other Motorcycles:
    Triumph900 Scrambler 1200 HD Nightst
    Several people have asked about the ignition on 2012 WR125 ,yes its the Ducati ignition,I figured it had to be because the ones I rode just ripped.billf
    BILLF, Sep 23, 2011
    #1

  2. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    Is the stator the same just a different cdi or is the whole thing different
    TROFFER88, Sep 23, 2011
    #2
    wallybean likes this.

  3. ajaxauto Husqvarna
    Pro Class

    Are you sure I rode the same bike that you rode at the Press Demo days the week before.
    I asked the same question since the bike ran so well and could not get a correct answer.
    What i did notice was there were no lights and no wires to hook one up
    Also in the 2012 catalog it states different ignition between the 125 and the 250/300
    ajaxauto, Sep 23, 2011
    #3

  4. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    Can you upgrade to the new ignition and still run lights?
    454x, Sep 23, 2011
    #4

  5. ajaxauto Husqvarna
    Pro Class

    I also asked that question and at that time could not get a answer.BUT i can tell you that you can rewind a CR stator and get 40 watts of power. Cost about 100 dollars from Ricky Stator located near San Deigo Calif .The Wr 125 i rode did run well but felt like it still had a flywheel weigh compaired to the Cr.Which i rode back to back
    ajaxauto, Sep 23, 2011
    #5