1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 2012 WR300 - bar risers

Discussion in '2 Stroke' started by surge, Apr 10, 2012.

  1. surge Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    2002 WR360, 2012 WR300
    Need to bring my bars up on the 300, ideally by 2 inches... is this possible without screwing with the cables and what not? The bloke at the dealership seemed to think I was being greedy and that 1.5 inches was the maximum.

    Anyone raised the bar by this much?
    surge, Apr 10, 2012
    #1

  2. surge Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    2002 WR360, 2012 WR300
    Probably should have mentioned the bars etc are stock...
    surge, Apr 10, 2012
    #2

  3. motosportz mike CH Sponsor

    Location:
    Washington state
    motosportz mike, Apr 10, 2012
    #3

  4. surge Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    2002 WR360, 2012 WR300
    Wicked! Sending PM...
    surge, Apr 11, 2012
    #4