1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2013 Te 310 Europe Starter Motor

Discussion in '4 Stroke' started by Antz04, Jul 19, 2021.

  1. Antz04 Husqvarna

    Husqvarna Motorcycle:
    (Europe) 2013 TE 310
    Other Motorcycles:
    None
    Good afternoon all, 1st post on here. So thank you accepting my request to join. I’m really struggling with starting issues.

    I’ve replaced

    Battery
    Starter solenoid switch located on frame with 30amp fuse
    Checked HT leads to starter and earth.
    My valve clearances are .20mm on both exhaust and .010 and .013 on inlet. How close to .016 do I have to get.
    Starter motor bushes worn down to copper wire and full of carbon. I can’t find replacement bushes.

    Any help or advice will be greatly appreciated. !!!
    Antz04, Jul 19, 2021
    #1

  2. Giack Husky310R Husqvarna
    AA Class

    Location:
    Piemonte, Italy
    Husqvarna Motorcycle:
    TE310R EVO2-TE 310R MP19-WR300 SB
    Other Motorcycles:
    Ktm 300 factory 2011
    Yamaha WRF 450 2007 brushes are direct replacement
    Giack Husky310R, Jul 19, 2021
    #2
    tntmo likes this.

  3. Antz04 Husqvarna

    Husqvarna Motorcycle:
    (Europe) 2013 TE 310
    Other Motorcycles:
    None
    Awesome thank you very much.
    Antz04, Jul 20, 2021
    #3