1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2013 wr and IMS tank

Discussion in '2 Stroke' started by marshwater, Jun 24, 2014.

  1. marshwater Husqvarna
    A Class

    Location:
    WNC
    Husqvarna Motorcycle:
    '12 TE449 (sold) '13 WB165
    does anyone know if the IMS 09-12 2.9 gal tank will fit on a 2013 wr125? thanks!
    marshwater, Jun 24, 2014
    #1

  2. oldkoot Husqvarna
    AA Class

    Location:
    Iowa
    Husqvarna Motorcycle:
    2014 cr125/165
    Other Motorcycles:
    KX200 kdx220 kx250f rz350 ht1-b90
    It should I have one on my 2014 CR. If you have a Scotts steering dampener it will hit the post. Are you going to sell the stock WR 2.2 gal tank?

    Attached Files:

    oldkoot, Jun 24, 2014
    #2

  3. marshwater Husqvarna
    A Class

    Location:
    WNC
    Husqvarna Motorcycle:
    '12 TE449 (sold) '13 WB165
    No, I'd keep it. Although, the manual said it's a 1.85 gal tank.
    marshwater, Jun 24, 2014
    #3

  4. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    My shrouds don't line up correctly...
    flyingbob, Jun 24, 2014
    #4

  5. oldkoot Husqvarna
    AA Class

    Location:
    Iowa
    Husqvarna Motorcycle:
    2014 cr125/165
    Other Motorcycles:
    KX200 kdx220 kx250f rz350 ht1-b90
    I know the stock CR is only 1.7 and that would be cutting it close on a 2hr race with out stopping
    oldkoot, Jun 24, 2014
    #5