125-200cc 2013 WR144 I want to install headlight and tail/brake light what do I need???

I just brought my son a wr125/144, it did not come with the light kit. I want to install them but not really sure where to start.. was thinking about striping my wr300 down to copy the wiring harness depending on cost of OEM harness. Do I need a voltage regulator too???

I did a search here but I not sure I collected enough to feel ready to proceed..

Thanks....... Any and all help appreciated..

NOTHING???!!!???

My 13 wr125 has a rec(not a reg as still ac I think) so that's all you should need id imagine. Spare Yellow wire under tank is power. Should be able to run em straight off that. Ducati ignition doesn't like it much. Mine is harder to start with headlight on. I am no auto leccy however

I have two wr's. An 09 and a 10. All the wiring should be there. My 10 has the brake light switch on the front brake. My 09 has no switch. A banjo bolt switch from tusk will do the job. There should be a regulator under the gas tank. Make sure it is connected or you will blow bulbs. Not much to do other than that unless you want fancy switches and all.

Reg/rec I forget which does what. The little silver thingamajig with cooling type fins

Call Hall's they set me up with my light kit for my WR250, you should have everything except the lights, you need to tap into the yellow wire from the stator but the kit tells you how to do everything.