1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 2014 WR300 with Baja Designs problems

Discussion in '2 Stroke' started by fastkx125, Apr 1, 2015.

  1. fastkx125 Husqvarna
    AA Class

    Location:
    Long Island, NY
    Husqvarna Motorcycle:
    TR650
    I put the Baja Designs LED headlight on my 2014 WR300, they also sold me a "DC acc kit" it comes with a Reg/Rec, a small battery, and a switch. I hooked it all up and... The bike runs great with the lights on, but like crap with the lights off. Anyone have any Ideas?
  2. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
    sounds like a miss wiring problem on a switch or the switch activates a mode that create a load (big one) on the regulator (could be miss wired there)

    with all info you give now I suspect a wiring problem

    Robert-Jan
  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    check your ground
    most motorcycles use the frame as a ground and the issue is paint
    check your connections at the coil, the engine mount bolts and headlight ground wires
  4. fastkx125 Husqvarna
    AA Class

    Location:
    Long Island, NY
    Husqvarna Motorcycle:
    TR650
    I replaced the battery with a large cap and that fixed it.