1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC 2016 TE 300 - Winding sound after cutting engine?

Discussion in '2st' started by idahodirtrider, Jun 19, 2016.

  1. idahodirtrider Husqvarna
    C Class

    Husqvarna Motorcycle:
    TE 300
    Other Motorcycles:
    None
    Hi All- This doesn't happen all the time but every once in a while when I cut the engine, it almost sounds like the starter is winding down. Has anyone had this issue? Tips?
    idahodirtrider, Jun 19, 2016
    #1

  2. ggg Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE250 14
    Other Motorcycles:
    NONE
    yes it sound like the engine is screaming almost a metal shrill sound, mine does this at times mainly when the throttle is backing off, the other day i was on dirt road top gear around 60mph the engine mad that sound and decelerated and then continued on its way very strange
    ggg, Jun 20, 2016
    #2

  3. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Tight tolerance cut gears. Quality
    HS507, Jun 20, 2016
    #3

  4. jaxsplatt Husqvarna
    AA Class

    Location:
    Bundaberg, Australia
    Husqvarna Motorcycle:
    '10 WR300, 2000 TE410
    Can't say I have notice or heard this on mine...
    jaxsplatt, Jun 23, 2016
    #4

  5. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    I myself have never heard it either
    87husky500xc, Jun 23, 2016
    #5