125-200cc 2019 Wp Xplor 48 Fork Oil/air Chamber Height

Hello All, first post here so bare with me:
I've had my 2019 TE 150 for a while now and I've got 82 hours on it. I just put new oil in both forks (I know, I waited wayyyyy too long) and I saw on a video from Tokyo Offroad (
View: https://www.youtube.com/watch?v=KdWAN_Vi2ZA
) where he uses an oil level gap tool at the end to get the exact level. So I bought one. Well, I found out there is no air gap spec in my manual, in the video he measured it at 110mm, I tried that and sucked out a ton, way too much, so I put it back in the fork. The thing is that they made minor changes to the 2019 forks, they take more oil for example. I measured the amount of oil correctly. So I was wondering if anyone knows if there is a spec for the air gap on the 2019 WP Xplor forks? Or should I just stick with the measurement of oil and call it a day? Thanks in advance.

Here is the area for Italian, not Austrian bikes.

You should try in the Austria section http://www.cafehusky.com/forums/husqvarna-motorcycles-austria.100/ or by https://ktmtalk.com/

jeanjean

Thank you, will do!