1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    FE = 4st Enduro & FC = 4st Cross

FE/FC 2024 FE350w

Discussion in '4st' started by robertaccio, Jan 6, 2025.

  1. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    After 10 years with 300 2Ts I'm back on a 4T
    2013 TXC310R 4 stroke
    2014 TE300 (Rekluse Clutch)
    2017 TX300 (Rekluse Clutch)
    2021 TE300i
    2024 FE350w 4 stroke
    This will take me some time to adjust.....engine braking, engine feel, bike mass feel.
    I have 1 race with her, the Tecate Enduro and some trail rides. @ 15 hours total time on the clock.
    Samco full hose kit
    Evans Motorsports coolant
    Athena GET ECU
    Stock muffler modified with Pro Moto Billet end caps. Get out your die grinder for this operation.
    heavier rear spring ( I'm 208 on a good day 215 after a binge)
    I'm actually considering a Rekluse clutch for mostly the same reason on my 2T bikes but more on the 4T as a slipper clutch for decel wheel hop. More than anything this is where I liked the Rekluse. I used my clutch lever all the time on my 300s
  2. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    I may do as I have all my past 4 strokes and run the crankcase breather into a K&N type air filter routed and stowed in a good spot, perhaps in the airbox. To keep the crankcase vapor out of the intake tract.
  3. Crashaholic Husqvarna
    Pro Class

    Location:
    Antelope Valley, CA.
    Husqvarna Motorcycle:
    73 450WR 6spd motor in a 75 MK frame
    I've read about the FE350, sounds like a great bike. I'd have to get used to the smaller displacement but that would be a good idea at my age. :oldman:

    Question, how would stowing the crankcase breather in the airbox keep crank vapor out of the intake? :thinking:
  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    Point taken, I had always routed the crank vent hose/filter outside the airbox , which would most likely be my course of action. I had my others in various locations including up front behind the skid plate, also out back behind the side cover.
  5. Crashaholic Husqvarna
    Pro Class

    Location:
    Antelope Valley, CA.
    Husqvarna Motorcycle:
    73 450WR 6spd motor in a 75 MK frame
    That sounds good to me. On my early Husabergs I'd plug in a wire covered filter on the end of the crankcase breather hose and hide it someplace out of sight. Its my understanding that as long as a 4t motor is healthy blow-by is almost nonexistent.

    Best of luck with your FE350w on future competitions.
  6. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    First 2 races 2024 Los Ancianos Tecate Enduro 60 class (2 loops). finished mid pack , was super tired was not happy with bike or rider. second race was yesterday after hitting the gym and cutting some weight, a solid 3 hour XC/HS race won the 60 class will check OA times for OA position, but for sure I passed alot of the younger guys on the lines in front. Liked myself and bike more this race. Getting the feel of the 350 and proper clutch work
    Dirtdame likes this.