1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

310 /250 A/M piston kit

Discussion in '4 Stroke' started by R_Little, Jun 13, 2016.

  1. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Does Pro-x make a piston kit for the x-lite?

    Anyone use one?
    R_Little, Jun 13, 2016
    #1

  2. joedirt Husqvarna
    AA Class

    Location:
    PA
    Husqvarna Motorcycle:
    wr250
    I have used pro x pistons in a x lite.
    joedirt, Jun 13, 2016
    #2

  3. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Cool

    Know where to get one?
    R_Little, Jun 13, 2016
    #3

  4. Aaron8 Husqvarna
    AA Class

    Aaron8, Jun 13, 2016
    #4
    Trenchcoat85 likes this.

  5. jetmani Husqvarna
    AA Class

    I used a PRO X piston in my 2011 TE250 X-lite, still going strong.
    jetmani, Jun 13, 2016
    #5

  6. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Awesome!

    Thanks!
    R_Little, Jun 14, 2016
    #6

  7. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    I have a hi compression vertex piston going in a 2013 txc 250, it was 185.00.
    rancher1, Jun 14, 2016
    #7

  8. Matthew525 Husqvarna
    AA Class

    Location:
    New Berlin, WI
    Husqvarna Motorcycle:
    2013 TXC 250R
    Other Motorcycles:
    KTM 525, HONDA CRF150
    I have good used cylinder and piston from Stock 2014 250 txc. If anyone is interested $200 for both about 20 hours total.
    Matthew525, Jun 14, 2016
    #8
    lsoup likes this.

  9. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    i see the Pro-x piston is 13-1 compression.

    Is that the stock compression?
    R_Little, Jun 15, 2016
    #9

  10. Aaron8 Husqvarna
    AA Class

    I can't find the CR listed in the shop manual. :confused:
    Aaron8, Jun 16, 2016
    #10

  11. joedirt Husqvarna
    AA Class

    Location:
    PA
    Husqvarna Motorcycle:
    wr250
    joedirt, Jun 16, 2016
    #11