1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

310 kit questions.

Discussion in '4 Stroke' started by XLEnduroMan, Dec 10, 2009.

  1. XLEnduroMan Heroes Ride Huskys. The others follow.

    Location:
    Durham, CA.
    Husqvarna Motorcycle:
    '18 Husqvarna 701 Enduro.
    Other Motorcycles:
    '20 Ducati Hypermotard 950.
    Have a 2008 TE 250 that wants a 310 kit. Have iBeat. Will I be able to tune the limited 08 ECU with iBeat to make the 310 kit run good? Hope to just buy the 310 kit for the upgrade, cylinder/piston etc, no electronics. Really don't want to buy PC and auto tune. I know some CH members have done the 310 kit. Anyone install the 310 kit on an 08 with good results with just ibeat, no Power Commander, etc?
    XLEnduroMan, Dec 10, 2009
    #1

  2. HomeFinance Husqvarna
    A Class

    George at Uptite and Tasky's know how to do it. I rode a 08 TE 250 with the 310 kit installed by Tasky's and tuned with i-beat.That bike ran great. Just as good as my 08 TE with the Athena efi specific kit.
    Russ
    HomeFinance, Dec 10, 2009
    #2

  3. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    Call George at Uptite. He will tell you how it's done. He's done a few of them and has it figured out.
    1 714 540-2920

    Nearly the first 08 TE 250 he got in back in Mar of 08 was one that the buyer wanted the 310 Athena kit on.
    glangston, Dec 10, 2009
    #3

  4. NumberCruncher Husqvarna
    AA Class

    Location:
    Wa State
    Sounds familiar to me as well . . .

    That bike did run very well. Too bad the gas tank is/was so stinkin' small. Please Husky please!

    NC
    NumberCruncher, Dec 11, 2009
    #4

  5. XLEnduroMan Heroes Ride Huskys. The others follow.

    Location:
    Durham, CA.
    Husqvarna Motorcycle:
    '18 Husqvarna 701 Enduro.
    Other Motorcycles:
    '20 Ducati Hypermotard 950.
    This is good news. I hope soon to get one of the 300cc kits from Motosportz at that great price. :thumbsup:

    When doing the big bore, would it be beneficial to install SS valves all around?
    XLEnduroMan, Dec 11, 2009
    #5

  6. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    if your valves are solid and holding i would not worry about it. How many miles / hours on the bike?
    Motosportz, Dec 12, 2009
    #6

  7. XLEnduroMan Heroes Ride Huskys. The others follow.

    Location:
    Durham, CA.
    Husqvarna Motorcycle:
    '18 Husqvarna 701 Enduro.
    Other Motorcycles:
    '20 Ducati Hypermotard 950.
    Bike has about 2.2K miles (dang pavent between the dirt) and about 91 hours. Bike runs like a top. G/F just want some more grunt in her Husky. :thumbsup:
    XLEnduroMan, Dec 13, 2009
    #7