1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 360 exhaust

Discussion in '2 Stroke' started by Mollet, Jul 10, 2012.

  1. Mollet Husqvarna

    Husqvarna Motorcycle:
    Husky CR125 -00 and incoming CR250
    from what year do i need use? engine -94 on a frame -03.
    Mollet, Jul 10, 2012
    #1

  2. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    FMF Gnarly from 00-02.

    Stock exhaust from 96 onwards should fit but you may need to modify where the stinger pops out, otherwise they pretty match all fit.
    ohmygewd, Jul 10, 2012
    #2

  3. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    Yep. And if you have trouble getting the carb to mate up with the air boot, you might want to try the 2002 360 air boot. It will fit right on the airbox.
    MOTORHEAD, Jul 10, 2012
    #3

  4. wallybean Mini-Sponsor

    Location:
    Montana
    You need to get in touch with Bill's as I am dropping off my 2000 WR360 there tomorrow. He will also have the two stock SPES pipes that I have as spares. They will bolt right up and fit nicely.
    wallybean, Jul 10, 2012
    #4

  5. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Is that your hybrid 360 Walt (WR250 with the 360 motor)?
    ohmygewd, Jul 11, 2012
    #5

  6. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    "Bill's", as in Bill's Pipes ?
    MOTORHEAD, Jul 11, 2012
    #6

  7. wallybean Mini-Sponsor

    Location:
    Montana
    Bill's motorcycle's plus. He has two spiffy stock pipes. I traded off my 360 I was never going to sell to create another project 165 bike from a '12 WR125. :D I am sick and will probably regret parting with the 360 that is such a sweetheart.
    wallybean, Jul 11, 2012
    #7