125-200cc 39mm RB designs Mikuni settings

Anyone running one and care to share their settings with this carb ?

I am finding I may need to go to a larger than a 40 pilot as bike will not start with air screw more than a couple of turns out - Bike 2013 WR 144 .

I have 470 main and standard needle

144 kit is very aggressive in power delivery and a bit flat in the middle.
Thinking that I ll try richer Suzuki needle again and 5 slide

Has great power but spins up easily

Yeh I remember you saying that last time you had one .
Just wondering if leanness may cause aggressive behaviour.
Probably try re ringing the 165 soon and run it - just had a few issues with fuel and detonation .
and there always the 125 again - too many options ...

I actually overheated the 144 on sunday on a loose hill - my first time

Nice view

I had a CR and WR at the same time and found that I had to go up on pilot and down on main for the WR when I switched carbs between them. That included an RB TMX. I can look up my setting when I get home.

Prime ridding RD, wish we that many hills up here..
Mite need to plan a family trip down there in the near future ( bikes this time, not Aust zoo)