1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

430 ae crankshaft

Discussion in 'Vintage/Left Kickers' started by Michel Dufayard, Jul 11, 2020.

  1. Michel Dufayard Husqvarna
    Pro Class

    Location:
    France
    Can someone give me the width of the weights +conrod of a 430 ae ( must be around 50-52 mm) ?
    Where do you buy your 430 ae conrod ?
    Can a 430 cr-wr conrod do the job if I shorten the length of the pin? Thanks
  2. 86 400 XC Husqvarna
    Pro Class

    Location:
    Calgary
    Husqvarna Motorcycle:
    75,82,83,2x84,85,3x86,87,88 and 89
    Other Motorcycles:
    more Huskys
  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    the 430's, 400's all share a rod and the shorter pin is due to narrower side plates
  4. Michel Dufayard Husqvarna
    Pro Class

    Location:
    France
    The pin length is 52 mm. I didn't remember tritrophy had 430 ae rod. Thanks.
    86 400 XC likes this.