Hi, Searching for intake valve for my 2009 . any ideas ? can't find s**t on the internet Is there another motorcycle that has the valves the same with the husqy, an aftermarket option? Thank you.
Halls may have it https://www.halls-cycles.com/we-sell-accessories-and--parts-catalog If not get the part # 8000 A9320 and check local Husqvarna/KTM dealer. They may be able to source one.
for shims I use ones intended for Kawasaki ZX14r. Same size, available at your local Kawasaki dealer instead of waiting for them to arrive from Austria
part numbers are going to depend on the shim thickness you need. Here are 2 examples for part numbers that I happened to need, you will obviously need different part numbers. Look at the Kawasaki microfiche to get the correct part number for the thickness which you need https://www.partzilla.com/catalog/kawasaki/motorcycle/2018/zx1400jjf-ninja-zx-14r-abs-se/valve-s
If you find a valve you will most likely need to re-shim. These work on the TE-630: https://www.amazon.com/dp/B000UKHCM4 Kind of a shame to have to get a full box for only a couple of shims. Once you find what thickness you need, you could ask if anybody has a spare. Or if you need a thinner shim than what you already have, you can gently sand it down to the needed thickness.
