610 SM Fender Eliminator?

I'm trying to find a fender eliminator for my 09 610 sm and I'm not having much luck. I'd like to keep the stock turn signals if possible and I don't really want to do a hack job on the stock plastic hanger, with all the different angles I don't think that would be the best.

Any ideas here? Have you bought something like this somewhere?

Just pull the black tail, whack it off and sand it smooth and put it back on, then figure out a place to bold a small piece of aluminum angle for the plate...

Here's my 630:

Before


And After

Great job on the mod...I did mine yesterday and it looks great...didn't even take anything off the bike...Dremel worked great...only question is what you did with the license plate light that is left hanging...I just took the bulb out and taped it under the remaining tail.

If you pull the black tail off, you can unplug the light and remove it, that's what I did

I used the Baja Design LED, used flush mount TS though, didn't like the stock ones. 2008 SM610
took the whole bracket off and ran the supplied screws through the fender.