Can someone explain exactly what a power up kit is please and how much they cost and where I can buy one I'm new to husky so am on a steep learning curve, any guidance on tuning would be great, I'm thinking of putting a 14t gear wheel on to improve gearing without having to buy a new chain also thinking of the arrow pipes and ECU
I see... you started a similar thread in Cafe Diner, where you did not get a response, because that is the off topic area - hopefully you will get a better response here in 610/630. I'll go ahead and delete your other thread. Welsom!
Call your husky dealer, or Halls Cycle, they should be able to hook you up. The power up kit simply deletes the lambda (oxygen) sensor, and replaces it with a brass plug in the pipe and a resistor in the harness. This puts the bike in open loop mode and allows for much more aggressive fueling. The stock bikes are terribly lean from the factory, and even worse once you open up the pipes and airbox. With the power-up and, at minimum, an I-beat tweak, you and the bike will be much happier. I'd recommend a JD Jetting tuner if you can read instructions and know how to push buttons.
1) The brass plug and the resistor, 2) The JD tuner .... and hey presto, it´s a new, better bike. 1) is a MUST and 2) is the icing on the cake.
Other than the JD tuner you can build the PU kit for nearly free. The JD IS the final secret though. Cam.
