All 2st 7602 racing Carb filter

i just fitted a 7602 racing Carb filter, re-routed the four carb vent lines and left the float overflow alone. i did it a bit differently to the instructions and re-routed to airbox, tucked it under the tank and easy
to access for carb filter cleaning.

pics attached

more pics

Nice one . Looks like a good idea to me. How much ?
You still running the Mikuni ? Whats the blue thing in the air box?

hey mate.
the t6 filter cost $38US/
http://www.7602racing.com/prod_t6cf.php


yeah mikuni is fine, thinking i should lean it one clip for summer (running rich with the warm weather at the moment)


the blue thing is a husaberg powerpart. spare spark Plug Holder
Offers space for safe-keeping fuses. part #HB-7802906400068
cost me $3.15
http://www.cyclebuy.com/husaberg/accessories/tools_misc.htm

You'll have problems with it routed like that. The two upper vent hoses a fine routed up into the airbox, but the bottom two need to be able to drain.

That's what the four hose set up is all about, allowing for proper draining.

thanks for that info

but my mechanic said that should work fine.
ive ran 4 hoses to the airbox on all my bikes, and drain hose down no problem

There is usually 5 hoses hanging down. One of them goes straight into the bottom of the fuel bowl and is connected to a brass shaft that sits in the top of the bowl so when you tip the bike over fuel comes out, instead of flooding the carb and engine. You need this to point down.

The other 4 are actually 2 pairs of hoses that vent into the fuel bowl also. Each pair of hoses run off 1 t-piece on either side of the carb.

I Just have to make sure i clean the T6 filter, same as the air filter. being in the airbox it will be heaps easier to check the T6 filter
i'll test it out and let you know after a few rides.

True but take the carb out and lean it over and fuel comes out the bottom vents. with the bottom vents in the box the bowl can empty itself on your filter when you drop the bike