1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 800064863 Rear Wheel Bearing Holder Nut

Discussion in '2 Stroke' started by racer726, Apr 15, 2019.

  1. racer726 Husqvarna
    AA Class

    Location:
    Unionville, MI
    800064863 Rear Wheel Bearing Nut

    I need two of these. Any sources? I've checked the usual places. Hall's, Bills MC, etc.
    racer726, Apr 15, 2019
    #1

  2. Saabman82 Husqvarna
    A Class

    Husqvarna Motorcycle:
    1994 wxc 250
    Other Motorcycles:
    1978Kz650 (810),1976 kz900,1977xs650
    Did you ever end up finding these nuts? I am on the quest to find one now....and remove the old one...how did you remove yours ?
    Saabman82, Oct 16, 2020
    #2

  3. jeanjean Husqvarna
    AA Class

    Location:
    Netherland
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    IT175H
    jeanjean, Oct 17, 2020
    #3
    steadydirt likes this.

  4. Saabman82 Husqvarna
    A Class

    Husqvarna Motorcycle:
    1994 wxc 250
    Other Motorcycles:
    1978Kz650 (810),1976 kz900,1977xs650
    Some popped up on ebay. Thankfully! According to my hours of sleepless research last night , 89-99 honda cr250R uses a bearing retainer ring that appears
    to be the same size (44mm) . I was going to cross my fingers and order one and hope the thread pitch was the same; but thankfully i found the proper husky part. I did order the motion pro tool to insert/remove the honda rings tho because it looks like a great match... Ill report back to this thread so all the info is in the same place for the next poor sap thats in this predicament...that being said drill out the spots where the retainer ring was peened BEFORE trying to remove it and maybe you wont need a new one.....oops....
    Saabman82, Oct 17, 2020
    #4