82 430 xc

just completed rebuild on second outing swollowed a load of water must be 3 ft deep completly filled motor ,stripped top end and renewed piston kit cleaned carb on start up backfired and nearly blew me through garage roof been limping for three days , not gokin, anyway started after bout 5 kicks does anyone know how to check the timing on my mini 6 i have found two punch marks on the rotor one at TDC one before these line up to a marker on the stator when lined up i can see though a lagge hole two markes on the coil body and an arrow i have moved the stator slightly to make both lines on the coil body the same distance in the hole is this correct as there does not seem to be a timing hole for a rod all the holes are blocked off any ideas. here a a picture goes very well at bottom end but seems a bit reluctant to rev right out like the 2 strokes i am used two

Nice looking bike . How does it handle with the ITC shocks on the 82 frame , Thanks Ron

cheers Ron . ye needs to be set to softest settin on spring rate .now ive completed work think i should invest in some shocks and put these on sale i have cut and re welded the bottom eyes to make slightly lower

hey matt ,if your still around what did the disc brake forks come off of? saw some on ebay and cant figure out what year/model had them.