1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 84 CR 500 Jetting???

Discussion in '2 Stroke' started by RonDog, Jun 1, 2010.

  1. RonDog Husqvarna
    A Class

    Location:
    Seattle
    I live in Seattle/sea level, can anyone tell me what jet's are approprate? im struggling with jetting the stock Mic carb, can anyone help?
    RonDog, Jun 1, 2010
    #1

  2. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    whats wrong with it ?
    rockdancer, Jun 1, 2010
    #2

  3. rajobigguy Administrator

    Location:
    So.Cal.
    What sz. carb. is it?
    rajobigguy, Jun 1, 2010
    #3

  4. RonDog Husqvarna
    A Class

    Location:
    Seattle
    Hard starting and will not run on the bottom end....im sure it has the stock jetting as it only has mabey 5 hours on the entir bike.
    RonDog, Jun 4, 2010
    #4

  5. RonDog Husqvarna
    A Class

    Location:
    Seattle
    stock 40/mm mic
    RonDog, Jun 4, 2010
    #5

  6. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Try posting in the Vintage restoration projects section
    sounds like the re must be something amiss. Reed issue ?
    You could try to play with jetting or needle height to see if there are any improvements .
    If you dont mind changing from OEM try a new Keihin or get an as new 38mm Mukuni from a wr 125 there should be heaps around!
    rockdancer, Jun 6, 2010
    #6