1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

84 Husky wr 250

Discussion in 'Vintage Restoration Projects' started by snfpagp, Aug 15, 2013.

  1. snfpagp Husqvarna

    Location:
    Wilmington NC
    Husqvarna Motorcycle:
    86Husqvarna wr 250
    Other Motorcycles:
    92 KTM 500 sm
    I needed a new cylinder for my 84 Husky wr 250 .I got one from ebay but its 85 the housing is the same but the ports inside and the top part that runs the coolant are less holes are different would will it work ?.Need some advice weather i re sleeve my original one or take a chance on what i both.Also the new cylinder sleeve is a bit scorn should i sand it down a bit .Thanks
    snfpagp, Aug 15, 2013
    #1

  2. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    Is the 84 a typo? I see 87 in your profile, and I believe that 84 WR250s are air cooled.
    oregonsage, Aug 15, 2013
    #2

  3. snfpagp Husqvarna

    Location:
    Wilmington NC
    Husqvarna Motorcycle:
    86Husqvarna wr 250
    Other Motorcycles:
    92 KTM 500 sm
    sorry it is
    snfpagp, Aug 15, 2013
    #3

  4. snfpagp Husqvarna

    Location:
    Wilmington NC
    Husqvarna Motorcycle:
    86Husqvarna wr 250
    Other Motorcycles:
    92 KTM 500 sm
    sorry it is, I got a 85 Husky Wr 250
    snfpagp, Aug 15, 2013
    #4

  5. snfpagp Husqvarna

    Location:
    Wilmington NC
    Husqvarna Motorcycle:
    86Husqvarna wr 250
    Other Motorcycles:
    92 KTM 500 sm
    Any Advice Oregonsage?
    snfpagp, Aug 15, 2013
    #5