86 400 XC #3

So been trying to find a watercooled 4 stroke locally with a want add for a few a months. No luck yet.

http://www.kijiji.ca/v-dirt-bikes-m...er/1096940949?enableSearchNavigationFlag=true

Picking up another 86, some ones project bike.

He has not touched it a few years. Some parts look very mint still. The crank is stuck and not rusty with a good top end still?? Has another good crank and rod for it to put in.

He has too many bikes (only this 1 Husky) and he asked me if I would want it, well i struck a great deal ($600) he lost money on this project
I could use a few newish parts for my bike, i had it out about 75 times this season brap

I want a mint stock pipe for the other 400 in my 87 WR
I need a clutch cover and kicker for the bush bike, wore out lol the kicker is about too fall off.
The clutch basket is getting ugly on the back gear teeth, the seals or bearings have never been done yet.
Back wheel hub is done, bearing falls out on sprocket side, been that way for 2 seasons.
1/2 inch play from the shock linkage at the seat, the spherical bearings (clunk clunk) lol
All them parts are mint on this new 86, so....



Man that seat vinyl sucks lol

View attachment 61286

I will most likely get all the bearings and seals, spit the cases and swap cranks, then put the 430 top end on that. Slap the left over stuff together as a spare running 400.


The other 2 400s
but the spare ugly bikes motor is the 87 and the rest is in boxes in a shed.
That rear wheel is beat and sloppy linkage on it too.




More parts to consume is always good..

nice work

Another one to add to stable! Not a bad bike to start with and looks like a good deal!