1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

87/88 WR foot pegs

Discussion in 'Vintage/Left Kickers' started by 86 400 XC, Oct 12, 2016.

  1. 86 400 XC Husqvarna
    Pro Class

    Location:
    Calgary
    Husqvarna Motorcycle:
    75,82,83,2x84,85,3x86,87,88 and 89
    Other Motorcycles:
    more Huskys
    They came of my 250 and they look modded or maybe not.

    None of my other bikes have the outer layer of stainless.

    I put them on the 89 510, as 1 is a little bent.

    So stock or not?

    20161011_152940[1].jpg 20161011_152949[1].jpg
    86 400 XC, Oct 12, 2016
    #1

  2. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    They are modded 87-88 pegs.
    87husky500xc, Oct 12, 2016
    #2
    justintendo likes this.

  3. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    IMO those are way better than the 86 and down pegs as well as the shifter too
    87husky500xc, Oct 12, 2016
    #3

  4. 86 400 XC Husqvarna
    Pro Class

    Location:
    Calgary
    Husqvarna Motorcycle:
    75,82,83,2x84,85,3x86,87,88 and 89
    Other Motorcycles:
    more Huskys
    well done like factory, thanks.
    86 400 XC, Oct 13, 2016
    #4

  5. oldbikedude Husqvarna
    Pro Class

    Location:
    Honey Brook Pa.
    Husqvarna Motorcycle:
    1988 wr 430 with cr suspension
    Other Motorcycles:
    66flh,67 CA77,76 CR125M,73H1,74ty250
    Yup, modded
    oldbikedude, Oct 13, 2016
    #5

  6. Eurofreak Husqvarna
    AA Class

    Location:
    Western NY
    Husqvarna Motorcycle:
    1986 TE 510, 1982 CR250, 2008 WR250
    Other Motorcycles:
    70's Triumph , Bultaco , Maico, etc
    My footpegs are similar but look stock.They are toothed , not the flat style with louvres for traction. What other differences are there between the 86 and 87? I notice the serial# starts the same-WP. I was told my bike was an 86...
    Eurofreak, Oct 30, 2016
    #6

  7. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    see your other thread...there are some 86 that have the 87/88 pegs..yours is one.
    justintendo, Oct 30, 2016
    #7