250-500cc '96-'03 wr/cr 125, 250 and 360 rear brake pedal fitment on a '11 wr 300

I found a decent replacement rear brake pedal on ebay that might work to replace mine that snapped at the tip this past weekend. The part # for my pedal is 8A0073343. Does anyone know if this pedal will fit my '11 wr 300? Does anyone know the part # for '96-'03 wr/cr 125, 250 and 360 rear brake pedal? Thanks a bunch! I don't feel like shelling out $100 for a new oem pedal, so I hope this works out in my favor.

The pedal in question came a '99 wr 250. The part # is 800073343 (whereas mine is 8A0073343). So what's the difference?

Yours has an A instead of a zero in the part number, It's probably the same.

typically if they change a color or modify it they change a number to a letter if it is a new design it usually gets a new part number

When I was looking for a straight brake lever Bryon at BMP pretty much said there are only two brake levers for Huskies I'm 99.9% the one you have will work.

The size of the pedal tip is the difference.