1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Aftermarket Gas Cap

Discussion in '4 Stroke' started by splawn, Nov 9, 2009.

  1. splawn Husqvarna
    B Class

    Location:
    colorado
    Does anyone know if the Tusk Billet aluminum Gas cap
    Will fit the stock husky tank on a 2005 TC-250?
    splawn, Nov 9, 2009
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I've been checking, but haven't found a crossover for it yet. I did find that the cap for a CRF150F will fit a KDX200/220 and a KLX300 though.:D
    Dirtdame, Nov 9, 2009
    #2

  3. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    Project 321 makes a very nice looking cap for huskys. It's pricey, but super sweet looking.
    Colo moto, Nov 9, 2009
    #3

  4. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    Suzuki caps fit good, lots of billet ones made for atv's I put one on my 09 wr 300 that was of ltr 450
    TROFFER88, Nov 9, 2009
    #4

  5. Phoenix Husqvarna
    AA Class

    Location:
    Oklahoma City, OK
    Husqvarna Motorcycle:
    2009 TXC 450
    Other Motorcycles:
    2 Ducs, 14 GG 200, 13 Husa 300
    I got one off ebay that was cheap and works great on my 06 510. Its aluminum with a brass breather and a rubber ring on the inside. No leaks and even was a great fit for my IMS. I just looked and couldn't find it on ebay, though.
    Phoenix, Nov 9, 2009
    #5

  6. splawn Husqvarna
    B Class

    Location:
    colorado
    The project 321 is nice but a little pricey! thanks for the help everyone! I will have to keep my eye out for something to fit the stock unit.
    splawn, Nov 9, 2009
    #6

  7. splawn Husqvarna
    B Class

    Location:
    colorado
    Ah the kdx! Everything seems to work on those. Should have kept my 1990....
    But sold to pay for the husky and have not looked back.... But I will say i rode the heck out of the Kdx for 12 years with no mechanical issues of any kind that bike was bulletproof.
    splawn, Nov 9, 2009
    #7

  8. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    That's why I kept my KDX and sold my EXC. :p
    Dirtdame, Nov 10, 2009
    #8

  9. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    You say this cap you bought fit an IMS tank? Did it fit the stock tank, too? The reason I ask, is because Tusk makes caps to fit IMS tanks and I would like a billet cap to fit my TE450. There is also a Tusk cap for Clarke tanks and I have a Clarke on my KX250. That cap didn't fit my TE though.:doh:
    Dirtdame, Nov 10, 2009
    #9

  10. Phoenix Husqvarna
    AA Class

    Location:
    Oklahoma City, OK
    Husqvarna Motorcycle:
    2009 TXC 450
    Other Motorcycles:
    2 Ducs, 14 GG 200, 13 Husa 300
    It was advertised on eBay as fitted to a 2006 Husqvarna 510 and fit the stock tank great (much better than that stupid crown-shaped cap). When I got the IMS, I stuck it on there on a whim and it turned out to be a perfect fit. I'd hate to say its a definite fit in all situations, but it worked in this particular case. I'll check when I get home, but I think the cap was too small for Troy's 09 TXC, though.
    Phoenix, Nov 12, 2009
    #10