1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Aftermarket shifters for 125 / 150

Discussion in '2 Stroke' started by Vinduro, Oct 25, 2010.

  1. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    Where can I get an steel shifter for the 150WR ? or 125WR ?
    The stocker looks vunerable.
    Vinduro, Oct 25, 2010
    #1

  2. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    its not
    ScottyR, Oct 25, 2010
    #2

  3. fran...k. Husqvarna
    AA Class

    Location:
    eastern ct
    Husqvarna Motorcycle:
    420ae 98wr125 2004wr250 others
    Other Motorcycles:
    electric freeride 1993 yam gts
    An older model would be steel. Mine is 1998 and I cut it and added an inch or so. The parts sheets look the same to me just different numbers. You might investigate that. I am harder on the brake pedal than the shift one, maybe just how you fall over.
    fran...k., Oct 25, 2010
    #3

  4. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Vinduro,

    I can tell you from the collision I just had with a tree/log on that side, racing. The shifter is pretty bullet proof. I was shocked not to find it broke in half.
    dartyppyt, Oct 25, 2010
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I'm running a hammerhead off a YZ. If your worried about it run a brake snake on the shifter side. Just run it with enough play to shift.

    [IMG]
    Motosportz, Oct 25, 2010
    #5

  6. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    A yamaha 125 shifter will fit, but may be a little short.

    But keep in mind a steel shifter will eat the shaft splines. The stocker will not.
    R_Little, Oct 27, 2010
    #6

  7. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    Not if you keep it tight. I have never worn out shifter or shaft splines.
    Vinduro, Oct 27, 2010
    #7

  8. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    Yes, It is a bit too short for my tastes. Need one a bit longer.
    Vinduro, Nov 1, 2010
    #8

  9. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    Which YZ and what length tip ?
    Vinduro, Nov 1, 2010
    #9