1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Another clutch cable question

Discussion in '2 Stroke' started by dirt addict, May 10, 2014.

  1. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    I've searched but can't find the photos of alternate cable routing. Ajaxauto used a 3" shorter cable and routed it differently. I saw a picture at one time but I can't find it now. Does anyone have a pic and good description of how they routed a shorter clutch cable?
    Thanks in advance.
    dirt addict, May 10, 2014
    #1

  2. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    nevermind, got it figured out...
    dirt addict, May 10, 2014
    #2

  3. shrubitup Husqvarna
    AA Class

    Location:
    Seattle WA
    Husqvarna Motorcycle:
    '00 TE610 (pretty much a WXE610)
    Other Motorcycles:
    Husaberg FE450, KTM 200EXC, Triumph
    did you use stock routing then?
    shrubitup, May 10, 2014
    #3

  4. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    I routed it similar to oem. From the motor I went under the left side coolant hoses, around the front of the frame to the cable mount. Then up along the right side of the frame to the upper cable mount. Then inbetween the triple clamps and over to the clutch perch. The difference is I didn't come under and behind the right side radiator, then over the top of the radiator to the triple clamps.
    The clutch pull is slightly lighter and definitely less cable flex.
    dirt addict, May 11, 2014
    #4