1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Another electric start thread

Discussion in '4 Stroke' started by johansen, Jan 8, 2022.

  1. johansen Husqvarna

    Husqvarna Motorcycle:
    2013 Husqvarna TXC310
    Other Motorcycles:
    2002 Honda Hornet 919
    Okay, I know this subject has been covered but there are 2 specific things I'm looking for advice on. I know many have chosen to eliminate the starter and I might get there... but, I'd like to try and get it working (one of the reasons I chose this bike).

    1. many have mentioned adjusting the left exhaust valve (decomp)... What is the proper valve clearance??? manual says .20mm I think
    2. The only thing wrong with the motor is a broken + lug. Has anyone located a starter rebuild kit or cheap replacement starter motor? -I am not paying $300 for a $40 motor!

    [IMG]
    johansen, Jan 8, 2022
    #1

  2. hhdwtmtw He who dies with the most toys wins...

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    '14 TE300, '11 TE449, '10 TE250
    Other Motorcycles:
    Royal Enfield Continental GT 650
    1. 0.20mm is the correct clearance for both of the exhaust valves (with decompression lever pushed out of the way).
    2. Nope. OEM only (part 8000A7059).
    hhdwtmtw, Jan 10, 2022
    #2

  3. Riksha Husqvarna
    AA Class

    Location:
    So Cal
    Found this searching through. Possible replacement

    Attached Files:

    Riksha, Jan 13, 2022
    #3