1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Any good aftermarket clutch perch and lever to fit huskys

Discussion in '2 Stroke' started by dan s, Jan 17, 2013.

  1. dan s Husqvarna
    A Class

    Location:
    united states N.J
    Husqvarna Motorcycle:
    2013 wr 250 A-Class
    I was wondering if anyone has any good experiences with a good aftermarket clutch perch setup on the wr 250's or 300's? Nobody list them for the wr's that I can see. I'm sure one could work that's made for another brand possibly. Thanks
    dan s, Jan 17, 2013
    #1

  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    just curious as to you don't like the stock one?
    it's a Domino, I tried others and have to say these are a good choice
    2premo, Jan 17, 2013
    #2

  3. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    +1 for the domi's. man it's nice to have a star flicker at the end of a clutch smokin' 15 min. climb!
    pvduke, Jan 17, 2013
    #3

  4. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    if you're liiking for something different they make a hydraulic kit
    heard they are nice
    2premo, Jan 17, 2013
    #4

  5. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    Motosportz Frankenbike set up!!!
    pvduke, Jan 17, 2013
    #5

  6. burstcasino Husqvarna
    AA Class

    Location:
    Austin, TX
    Husqvarna Motorcycle:
    2012 Husqvarna WR300
    Other Motorcycles:
    2001 KTM 520 exc
    Anybody know if Tusk or Motion Pro make a wr300 clutch lever? I've seen clutch levers for the TE250. Are these TE levers compatible for a 2012 wr300. Can't find a wr300 clutch lever anywhere.
    burstcasino, Feb 21, 2013
    #6

  7. burstcasino Husqvarna
    AA Class

    Location:
    Austin, TX
    Husqvarna Motorcycle:
    2012 Husqvarna WR300
    Other Motorcycles:
    2001 KTM 520 exc
    Looks like the TE has a juice clutch.
    burstcasino, Feb 21, 2013
    #7

  8. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    motion pro

    ebay

    tusk

    concept distributing

    google it there's tons of them...

    back in the day we'd swap em all out for Honda CR perches and levers...
    pvduke, Feb 21, 2013
    #8

  9. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    pvduke, Feb 21, 2013
    #9

  10. kx3089 Husqvarna
    AA Class

    Location:
    western pa
    Husqvarna Motorcycle:
    wr250
    I use a msr lever and perch,has a nice star adjuster
    kx3089, Feb 21, 2013
    #10

  11. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    ASV clutch lever/perches fit most anything I think. I took my ASV clutch off the KX250 I sold and put it on my WR, I did end up having a shorter cable made by Motion Pro for it.
    PowerKord, Feb 21, 2013
    #11

  12. nonamerider Husqvarna
    AA Class

    Location:
    Oklahoma
    stock.ihave tested most and they all have less than 26mm plus throw you need for your husky. most copy hondas specs at 25 . yamaha 24 etc. causes clutch problems.
    nonamerider, Mar 23, 2013
    #12