TE/TC any one know will the rear wheel from a 2014 Husqvarna tc 250,bolt on to a 2015 tc 250?

I sure hope so .I just bought one off eBay! The 14 husky had a 20mm rear axle while the KTM had a bigger one. Not sure if the 15 changed to the larger size and if they did do I just need the spacer or????

I believe Enduro engineering sells a kit

I know front axle changed size and have never got a real answer but it is my understanding you can put and older front rim on a 15 by just changing the rim spacers. That's what I'm told at least... I just can't confirm if the rear axle size changed from 14 to 15 on the huskys. Got a new takeoff 14 rear wheel with the tire for $400 delivered. Need to research front as well...

Rear axle on some bikes changed. KTM SX changed, so possible Husky TC changed. At the least you'll have to swap your '15 spacers into the 14 wheel to use it. At most you buy another set of spacers.

Think of it like the difference between '00 and '01 Husky rear wheels... '00 had small axle and spacers that pressed in the bearings. '01 has same wheel and bearings, but a larger axle that was the same OD as the bearings' ID and the spacer just fit in the seal. Different diameter axle and the same wheel....

From a KTM Talk wheel fitment thread.... This should apply to 14-'15 Huskys too.

"In 13 the rear axle got bigger on the sx and xc. In 15 the front axle got smaller on the sx and xc. Regardless, all you have to do is swap the spacers and any ktm wheel will fit on any bike from 04-15."

Both the 14 and 15 TC250's have a 20mm axle. The wheel and spacers will interchange between both bikes.

Thanks much. This to me means just buy a set of spacers and throw in the wheel I bought and bingo a guy can do a five minute tire switch. Should be able to put spacers in and older front wheel on a newer bike