1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Any other brand rad guards work on 08' 125?

Discussion in '2 Stroke' started by racemx904, Jan 5, 2016.

  1. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    I think I used a set of KTM 200 guards before and maybe redrilled holes or something....

    Any ideas?
    racemx904, Jan 5, 2016
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Force make good solid tough guards. I run em n never an issue touch wood. With yank $ what it is against Aus might be worth looking into?
    shawbagga, Jan 5, 2016
    #2

  3. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    Colo moto, Jan 6, 2016
    #3
    NCSteve and 454x like this.

  4. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Proper braces too not jus guards. Shameless plug colo! ;)
    shawbagga, Jan 6, 2016
    #4

  5. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    Well Colo I like your guards but I can get them for free from another manufacturer.... not saying i dont like yours.... So i was wondering if another brand bike guards were close.... like ktm 200 or something
    racemx904, Jan 6, 2016
    #5

  6. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    I must have mis understood your original post. I was thinking you were asking if another aftermarket brand made guards for your bike other than the brand you already had. But it seems like you are asking if rad guards off a KTM or other make of bike will fit your CR.

    I don't know of any braces made to fit another bike that would be a direct fit. Probably have to do a little modification like you said.
    Colo moto, Jan 7, 2016
    #6

  7. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    Sorry my post was vague at best after reading it lol
    racemx904, Jan 7, 2016
    #7