1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Anybody know the size of the chain tension rollers for 1986?

Discussion in 'Vintage/Left Kickers' started by frog, Apr 6, 2011.

  1. frog Husqvarna
    AA Class

    Location:
    MN
    I want to replace the chain tension rollers on my 1986 Husky 510. The bottom one is 34mm and top one is gone. They are the bigger one's on front part of the the swing-arm,not chain guide rollers.Thanks
    frog, Apr 6, 2011
    #1

  2. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Jon,
    Which ones, the front ones or the pair below the swingarm ? , ones on mine look the same, lower ones are the same as are fronts pair.
    Here's picture of mine.
    Husky John

    Attached Files:

    ruwfo, Apr 6, 2011
    #2

  3. frog Husqvarna
    AA Class

    Location:
    MN
    The one's that go above the swing-arm and below by the rear shock.
    frog, Apr 6, 2011
    #3

  4. oldhuskychuck Husqvarna
    A Class

    Location:
    Denver Co
    i used skate board wheels...they are cheap, and last forever.
    oldhuskychuck, Apr 7, 2011
    #4

  5. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Yeap i've done the same with 1/2 worn down skate board wheels (as there smaller in dia) & my local Action sports shop gave them to
    me for free .
    ruwfo, Apr 8, 2011
    #5

  6. Hwy Mini-Sponsor

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    '86 510TX / '90 250WXE / '87 510TE
    Other Motorcycles:
    '04 KTM 525MXC / '91 KTM 300DXC
    This OEM size is 1.5" diameter x .870" width.
    Here is Phillip's part at Husqvarna-parts. A little pricey but it's a exact OEM copy made of higher quality material.

    $28 with bearings.

    tn_IMG_4456.JPG
    Hwy, Apr 8, 2011
    #6