Anyone have a problem with chain guide wearing on rear sprocket?

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by scottyk, Mar 9, 2012.

  1. scottyk Husqvarna
    B Class

    Location:
    Deforest, WI
    I have a 09 te250 and the rear chain guide is wearing out the rear sprocket, anyone else having this problem? The plastic slides on one side have been worn out to the aluminum. Maybe I bent it, but it looks straight.
    scottyk, Mar 9, 2012
    #1

  2. JPinNC Husqvarna
    AA Class

    Location:
    North Carolina
    Husqvarna Motorcycle:
    2009 TXC250
    Other Motorcycles:
    2009 KTM 300 XC-W
    Yes, mine has done this a bit as well, wear marks and grooves showed up on rear sprocket soon after getting it (new); I have a new sprocket, chain, etc. ready to go on soon. I'll be getting the BRP chain guide as well.

    2009 TXC 250
    JPinNC, Mar 9, 2012
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Yes, wait until you smash it to the side. Do yourself a favor and get a chain guild from the good people at BRP (see sponsors here)
    Motosportz, Mar 9, 2012
    #3

  4. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    My WR did that right off the showroom floor. I took a deadblow hammer and whacked it.
    Dirtdame, Mar 9, 2012
    #4

  5. scottyk Husqvarna
    B Class

    Location:
    Deforest, WI
    Thanks for the replys, I purchased a brp today along with sprockets and chain. Design review Husky!
    scottyk, Mar 9, 2012
    #5