1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Anyone with a 125 . 2000-06 have a simple question

Discussion in '2 Stroke' started by eric125, Aug 9, 2012.

  1. eric125 Husqvarna
    A Class

    Location:
    Mass
    Husqvarna Motorcycle:
    2002 wr 125
    Other Motorcycles:
    2005 yamaha r6
    Just looking to see if anyone has a picture on how the clutch cable is ran.
    eric125, Aug 9, 2012
    #1

  2. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    Not sure how Husky run it on that model ! so I would personaly fit it with what ever the smoothest route is. ie no sharp bends/curves, that way it will always function at its best, Its surprising how many manufacturers have a bad stock layout with cables that can be improved on.
    johnnyboy, Aug 9, 2012
    #2

  3. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Lever over the the right side of the steering head where the mid cable adjuster clamps.....back over to the left side above the exhaust pipe then to the clutch cable boss on over the IGN cover.
    R_Little, Aug 12, 2012
    #3