1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Are The Head / Barrel Gaskets The Same Cr125 Or144?

Discussion in '2 Stroke' started by Cheekywig, May 14, 2019.

  1. Cheekywig Husqvarna
    A Class

    Location:
    Norwich, England
    Husqvarna Motorcycle:
    CR125 2013
    Other Motorcycles:
    Triumph Street Triple
    Not sure if the O ring set and base gaskets are the same on the CR125 and CR144 ? was going to order for my 144 but was unsure if the same?
    Cheekywig, May 14, 2019
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Looks like the 2011 CR 150 takes the same topend gasket and o rings as the later model 125s.
    Dirtdame, May 14, 2019
    #2

  3. Zomby woof Husqvarna
    Pro Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    2011 CR 150
    Yes they are the same
    Zomby woof, May 14, 2019
    #3

  4. Cheekywig Husqvarna
    A Class

    Location:
    Norwich, England
    Husqvarna Motorcycle:
    CR125 2013
    Other Motorcycles:
    Triumph Street Triple


    I had a black base gasket and the ones I've seen are green, does this have any baring on thickness? thanks.
    Cheekywig, May 15, 2019
    #4

  5. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    You will need one that is .3 mm thick.
    Dirtdame, May 15, 2019
    #5