1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Are the TE and SMR frames different?

Discussion in '4 Stroke' started by Mucci, Jul 22, 2016.

  1. Mucci Husqvarna
    AA Class

    Location:
    Santa Cruz, CA
    Husqvarna Motorcycle:
    '01 TE570, '13 TE310R, '19 701 Svart
    Other Motorcycles:
    HM 1100 Evo SP, Zero FX, R65, R80
    I'm wondering if the TE570 frame is different than the SM570R frame. I just swapped the SMR triple clamps onto my TE and there is a noticeable reduction in turning radius. The stop points on the SMR clamps are much closer together than the TE clamps. I'm wondering if this is normal or if I should modify the stop block on my frame.
    Mucci, Jul 22, 2016
    #1

  2. norma stitz Husqvarna
    A Class

    Husqvarna Motorcycle:
    SMR511
    Other Motorcycles:
    Nunya185
    I think the triple clamps are different. Not sure about the frames.
    norma stitz, Jul 25, 2016
    #2

  3. Mucci Husqvarna
    AA Class

    Location:
    Santa Cruz, CA
    Husqvarna Motorcycle:
    '01 TE570, '13 TE310R, '19 701 Svart
    Other Motorcycles:
    HM 1100 Evo SP, Zero FX, R65, R80
    Yea, SMR triples are 10mm wider. Still curious about the frame.
    Mucci, Jul 25, 2016
    #3
    Karl Hansen likes this.