Arrow exhaust

http://www.supermotojunkie.com/showthread.php?62106-All-exhaust-for-Husqvarna-SM-TM-610

Here is a list of exhaust that fit te/sm 610



What whil happen with te senzor in the photo? I found one,an Arrow.I want to put it on. View attachment 24917

That looks like a stock can that someone riveted an Arrow logo to.

no,it has te logo on it to:

To answer the question nothing, but if you still have the o2 sensor in the bikes not powered up aka running race map. This means the bikes running lean and only giving about 70% of the possible 100% power

it has enough power as it is. So i only change the cans and that;s it?

Yes, but its not all about power. The bike will run lean and that will make it run hotter. It's only about $45 for the kit and it takes 5min to do. You will get rid of the canister on the other side too. You can also get the part for $1.50 and leave the o2 in place but unhooked. Here's what will replace it if you get the kit.

Thanks for the advice.Will think about it.

Lots of info on TE 610 power up on CH. just do a search. As far as installing the can, it will be a flow through ( no cat ) and the bike will want more air and more air means it will need more gas, hence the power up kit. Here's an option for the air box mod to allow for more air. putting on that can means you should really at least do the power up so its not starving for fuel.

what is that? you open it up,and let more air to take in?

Yes, it's an EHSracing prefilter. It's the 4.5"x4.5" universal one