1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Axle Blocks - flat side

Discussion in '2 Stroke' started by Caferacerman, May 17, 2014.

  1. Caferacerman Husqvarna
    AA Class

    Hey Guys,

    At the risk of great humility...how in the heck are you supposed to get the flat side of the rear axle to line up with the axle blocks when torquing down the axle nut? Perhaps it would be better to upgrade the axle blocks?

    Thanks guys -:excuseme:

    Attached Files:

    Caferacerman, May 17, 2014
    #1

  2. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    The flat side is supposed to be up the front end by the adjusters, yours look to have spun !
    pull the axle and fit the block to the axle off the bike then simply refit, no great shakes if it has damages the block as long as everything tightens down with out the axle spinning.
    johnnyboy, May 17, 2014
    #2