1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Bar Risers

Discussion in '4 Stroke' started by novice, Oct 22, 2009.

  1. novice Husqvarna
    B Class

    Location:
    Essex UK
    Hi, can anyone recomend bar risers to use on an 09 450TE, they already have the big spacer, to remove for shorties, could another on be added or should I get some thing specific?
    novice, Oct 22, 2009
    #1

  2. Last Lap Husqvarna
    A Class

    Location:
    West Creek, NJ
    I used Enduro Engineering spacers. I added the 8 mm spacers to the stock spacers that came with the bike. It also came with a 5mm stack. It does not come with the longer bolts. Mine took a 10mm X1.50X100. It was alittle too long so I cut off the excess. This was on my TE310. I took it for a ride last night and is much better for me with less pressure on my wrist.

    Jeff
    Last Lap, Oct 22, 2009
    #2

  3. rabskyline Husqvarna
    AA Class

    Location:
    Sunshine Coast,Queenslander !!
    Husqvarna Motorcycle:
    2014 te250r
    Other Motorcycles:
    Yer maw !
    i bought a set from barrisers online and the guy sent me ktm ones....he said"they are universal.. nugget ! so, get the billet ones that go under bar clamp as they will fit better....well, they will fit , the others dont..
    rabskyline, Oct 24, 2009
    #3