1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Bearings and seals

Discussion in '2 Stroke' started by sabortooth, Aug 18, 2013.

  1. sabortooth No Class

    Location:
    Izard Co. Arkansas
    Husqvarna Motorcycle:
    11uptite167
    I am looking for a complete rebuild kit for frame,swing arm and wheels. Is Halls the best supplier?
    sabortooth, Aug 18, 2013
    #1

  2. kx3089 Husqvarna
    AA Class

    Location:
    western pa
    Husqvarna Motorcycle:
    wr250
    Halls and Beaver Creek Cycles(330-386-7353)Rodney at BCC likes to carry hard to find parts,
    kx3089, Aug 18, 2013
    #2

  3. sabortooth No Class

    Location:
    Izard Co. Arkansas
    Husqvarna Motorcycle:
    11uptite167
    Thanks for the tip.
    sabortooth, Aug 18, 2013
    #3

  4. Down Under XC Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    XC250 83', WR250 87','XC150 10
    Other Motorcycles:
    WR165 10, 83 KDX 250,
    I was looking also and Kelly / Husky world (forum sponsor) has on their website and all balls racing has them as well.
    Down Under XC, Aug 28, 2013
    #4

  5. Schony Husqvarna
    A Class

    Location:
    Fort Collins
    Will be doing the same this winter on my 300, I saw PROX makes some kits too. Hear lots of mixed reviews on allballs stuff just just another option.
    Schony, Aug 28, 2013
    #5

  6. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    The prox and allballs kits are about the same.
    rancher1, Aug 28, 2013
    #6

  7. Schony Husqvarna
    A Class

    Location:
    Fort Collins
    except the price then, good to know! :thumbsup:
    Schony, Aug 28, 2013
    #7