1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st best place to buy a 300 piston and rings?

Discussion in '2 Stroke' started by jaxsplatt, Aug 1, 2013.

  1. jaxsplatt Husqvarna
    AA Class

    Location:
    Bundaberg, Australia
    Husqvarna Motorcycle:
    '10 WR300, 2000 TE410
    looking for a 71.94 A piston and rings for my 300.. Can find a .95 easy enough.
    The barrel looks perfect, not sure if .95 is too big.. what do ya reakon ?
    jaxsplatt, Aug 1, 2013
    #1

  2. utopia Husqvarna
    AA Class

    Location:
    Jackson, WY
    Husqvarna Motorcycle:
    WR250, WXC125
    The only way to be sure is to measure the cylinder with a bore gauge.
    utopia, Aug 1, 2013
    #2

  3. PC. Husqvarna
    AA Class

    Location:
    Beaverton, OR
    Husqvarna Motorcycle:
    CR165 & CR144
    Other Motorcycles:
    KTM500
    PC., Aug 1, 2013
    #3

  4. jaxsplatt Husqvarna
    AA Class

    Location:
    Bundaberg, Australia
    Husqvarna Motorcycle:
    '10 WR300, 2000 TE410
    Thanx PC, if the bike had a few more hrs on it i'd give her a bit of a stretch but I think 20 thou ova is too big for now..
    jaxsplatt, Aug 1, 2013
    #4

  5. jaxsplatt Husqvarna
    AA Class

    Location:
    Bundaberg, Australia
    Husqvarna Motorcycle:
    '10 WR300, 2000 TE410
    Local Bike shop got me a Wossner.. No gudgen bearing.. Bit of a bugga
    jaxsplatt, Aug 10, 2013
    #5

  6. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    Gudgen bearning ? Also got a Wossner and it didnt come with a wrist pin bearning and there was no way the husky bearning would fit. Apparently somebody forgot to put the bearing in the box. Wossner specs there own wristpin bearing, check into it.
    454x, Aug 11, 2013
    #6

  7. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Piston kits do not come with wrist pin bearings in any of the brands. You always need to remember to order it seperately. I believe gudgeon is Italian for pin.
    rancher1, Aug 12, 2013
    #7

  8. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    BRYON at Bills told me that Wossner forgot to put it in the kit but thanks for mentioning that I'll know better next time.
    454x, Aug 12, 2013
    #8

  9. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    Well, not quite :) From our friends at wikipaedia
    A gudgeon is a socket-like, cylindrical (i.e., female) fitting attached to one component to enable a pivoting or hinging connection to a second component. The second component carries a pintle fitting, the male counterpart to the gudgeon, enabling an interpivoting connection that can be easily separated. Designs that may use gudgeon and pintle connections include hinges, shutters and small boat rudders.[1]
    The gudgeon derives from the Middle English gojoun, which originated from the Middle French goujon. Its first known use was in the 15th century.[1]
    oregonsage, Aug 12, 2013
    #9
    454x likes this.

  10. Bauten300 Husqvarna
    AA Class

    I got mine directly from wossner, yes woosner specs their own bearing. Wossner guy i spoke with says it is the same piston kit the KTM 300 exc 2008-2011 just
    a Different bearing


    Part numbers for wr300
    Piston kit - WO-8250DC
    Bearing - N1020
    Bauten300, Sep 10, 2013
    #10
    454x likes this.

  11. ajaxauto Husqvarna
    Pro Class

    Why do people want to change from the stock set up I have never had a problem with a husky piston Jeff at Halls always take care of it
    ajaxauto, Sep 10, 2013
    #11

  12. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    Wossener is forged and cheaper than stock. The vertex is cast.
    454x, Sep 10, 2013
    #12