1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Big Rear Brake for the WR 250/300

Discussion in '2 Stroke' started by ajaxauto, Dec 4, 2012.

  1. ajaxauto Husqvarna
    Pro Class

    I have seen many people complain about the small rear brake that over heats on the WR 250/300
    All the Husky bikes from the Cr 125 up to the 511 have the same size bigger rear brakes then the WR 250/300.
    On my bike which I got from Zip Ty Racing which was the magazine test bike that raced the 2 stroke Nationals Ty had made a custom rear caliper braket. You can then still run your stock caliper BUT you then can install a bigger rear rotor from a newer Husky.You can also mount it direct to the hub.Now gone is the floating rotor with the bushing that make noise and wear out.
    The new brakets will come with a custom shark fin to protect the rotor
    The price will be $99.95
    Need to see if there is a demand out there if so will run a order of 20 units to start
    Here is a picture of mine which was a early one and has no shark fin The new ones will have the fin

    Attached Files:

  2. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    I'm all in.PM with price please.Whats the price on the oem rear rotor?
  3. ajaxauto Husqvarna
    Pro Class

    Price of the Braket and shark fin is 99.95 Jeff at Halls has the rotor 217 789 0107 or any local Husky dealer could get you a price on the oem rotor

    After I rode my 300 with the bigger brakes I ordered one for my WR 250 which I had always had trouble with the rear brake
  4. Farmer John Husqvarna
    AA Class

    Location:
    Santa Clara, CA
    Husqvarna Motorcycle:
    2009 WR300
    Other Motorcycles:
    92 WR250, 01 KTM 400MXC
  5. Pure Filth Husqvarna
    AA Class

    Husqvarna Motorcycle:
    WR300
    Is the rear caliper bracket going to be one piece with the shark finn where the axle goes through the whole unit???
    Something similar to the Enduro Engineering rear disc guard and caliper mount???
    If you can post up a photo of what you have in mind I'll probably be up for it too.
    Let us know
    Cheers
    David
  6. ajaxauto Husqvarna
    Pro Class


    Shark fin will bold onto the caliber braket That way you can always change it if you ever hit it hard enought to damage it.There are some picture of other ones he has made at www.ziptyracing.com
    The new one will loks like these
  7. Pure Filth Husqvarna
    AA Class

    Husqvarna Motorcycle:
    WR300
    Thanks for the reply.
    It looks like a very nice bit of gear.
    Put me down for one as well.
    I can only imagine how good the bigger rear disc would be.
    Cheers
    David
  8. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    So if I call ZipTy could I get it right now?
  9. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    Tell him I want one too!
  10. ajaxauto Husqvarna
    Pro Class

    Ty told me on Fri he would start making them since so many people have asked for them.So give zip ty a call and but your order in 760 244 7028
    454x likes this.