Hey guys, I just recently jetted my carb on my 2007 sm610. I got the carb dialed in pretty much. The only issue I have is when it's idling and I lean it slightly to the left, the idle drops and the bike dies. When it's in it's upright position, it idles fine. When I'm riding and I make a left turn, it's fine. Only when it idles is when I have issues. Could it be the float valve is not to spec? When I opened the carb to jet it, the float and needle valve fell out because the pin slipped out, could it be it fell out of spec when it dropped out? If you guys have any help or ideas to help me solve this it would be greatly appreciated, thanks everybody
