1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Bing settings

Discussion in 'Vintage/Left Kickers' started by MT Husky, Jul 28, 2016.

  1. MT Husky Husqvarna

    Husqvarna Motorcycle:
    72 cr250
    Am trying to get my 1972 cr250 with a bing 84 going and wondering if anyone can help with jetting and needle settings, Fuel air ect. I'm at 3500 ft. Just a good starting point would help!
    MT Husky, Jul 28, 2016
    #1

  2. Crashaholic Husqvarna
    Pro Class

    Location:
    Antelope Valley, CA.
    Husqvarna Motorcycle:
    73 450WR 6spd motor in a 75 MK frame
    I'm not familiar with the Bing 84 but maybe the attached Husky Bing 54 application chart will provide you with a starting point. The chart lists the OEM jetting for several Huskys from the early 70's. Don't know if this will be of any help with your 84.

    I also attached an article on setting up a Bing 54. It goes into a lot of modifications but on page 3 it talks about how to correctly set up jetting.

    Attached Files:

    Crashaholic, Aug 1, 2016
    #2