Blank for Gas Cap Key - Success!!

Discussion in '610/630' started by denny, Oct 1, 2010.

  1. denny Husqvarna
    AA Class

    Location:
    Central Indiana
    I've learned from Hall's the gas cap key blank for my 2006 TE 610 is no longer available. I am not so comfortable with only one key.

    Has anyone found a substitute that will work?

    EDIT: Ilco brand: X140 VL8 are the numbers on the blank.
  2. 128954431 Husqvarna
    A Class

    Location:
    NT, Australia
    Any decent locksmith should be able to cut a blank from stock in about 3 minutes.
  3. SepticSkeptic Husqvarna
    B Class

    They sub out the gas cap. Cant remember the name of the company off the top of my head. A lock smith out in Bishop looked it up for me. He named some other manufacturers using their keys, mostly oddball stuff, can't remember all of them, but I remember Porsche was one. He said the key way is odd, but if I checked the blanks from the other manufacturers they would likely be using a key with the same key way profile. Otherwise your stuck getting a whole new gas cap assembly that comes with 2 new keys ~ $90.
  4. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
  5. miketv Husqvarna
    A Class

    Location:
    Columbus, Ohio
    My local locksmith was able to cut keys out of blanks for an older Alfa Romeo.
  6. denny Husqvarna
    AA Class

    Location:
    Central Indiana
    Success -- I finally found a locksmith who was willing to look through his blanks and find something. He used a blank for a Volvo (unknown vintage). The blank was too wide and too long, so the blank would not fit in the gas cap lock. But the lands and grooves were correct after cutting it works perfectly.
  7. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
  8. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Someone sold an aftermarket cap without a key.

    anyone remmember?

    Kelly, was it you?